Arc flash is a phenomenon which happens when electric produce light and heat while conducting through ionized air. Typically, in less than a second, when the electric field is strong enough to destroy the dielectric feature of the air, arc flash will be occurred and can cause severe electrical burns or thermoacoustic shock wave.
Thermal Hazard |
Exposure Time |
Temperature |
Thermal Transfer |
|---|---|---|---|
|
Thermal Hazard
Arc Heat |
Exposure Time
Up to 1 seconds |
Temperature
Up to 10,000°C |
Thermal Transfer
10% Convection heat 90% Radiant heat |
Combining OPF(pre-oxidized) & para-aramid fiber to provide high-level thermal resistance and adopting rayon to provide soft skin-friendly and breathable properties for clothing.
According to NFPA 70E standard, the Arc thermal performance value (ATPV) of Sunny Special fabric could reach 8.4 cal/cm2 and cause less than 15% (second and third degree) predicted body burn injury to the human body which conducted by ASTM F1930 minikin test.
AD009AZ
Flame-resistant material is matched with the right fabric weight and construction to create a rip-stop fabric that reaches 11 cal/cm²; It also offers the protection for welding spatter.
AT015AZ
Composition: OPF/FR-Rayon/Aramid/Anti-static
Compared to AT010AZ, AT015AZ offers value-added performance “Anti-static”, allowing customers to make different choices based on their specific needs. By integrating lightweight workwear, workers can experience burden reduced and enhanced productivity, all while maintaining the highest levels of safety on the job.
Electric Arc Category 2
Against heat and flame
Anti-static
Lightweight
Excellent low 2nd and 3rd body burn rate
AD008AZ
The golden combination of OPF (pre-oxidized), rayon, and aramid provides fabric with protection against arc flash and spatter generated by welding. It is suitable for every style of workwear.
AT013QZ
Fabrics not only provide flash fire and arc flash protection but also have liquid chemical splash and molten iron protection.
